U-15 Finishing mode priority
•
Determines the priority finishing mode when the copier is equipped with a
Sorter or Staple Sorter.
Setting Value Description Initial Setting
0 Non-Sort
O
1Sort
2Group
3 Sort-and-Staple
U-20 Auto panel reset ON/OFF
•
Selects whether or not to activate the auto panel reset function after the lapse of
60 sec. after a copy cycle has been completed or a Key on the control panel
operated.
If "0" is selected:
The control panel settings remain valid even after the lapse of 60 sec.
If "1" is selected:
The control panel settings are canceled and the copier is set into the initial
mode after the lapse of 60 sec. (Auto panel reset)
Setting Value Description Initial Setting
0 Auto panel reset is not activated.
1 Auto panel reset is activated (after 1 min.)
O
4. User’s Choice
Chapter 4
Special Function
100
To Next Page
Loading...
