Minolta EP1080 - Page 113

U-21 Energy Saving Mode ON timing
•
Selects whether or not to set the copier into the Energy Saving Mode after a
given time after a copy cycle has been completed or a Key operated.
If "0" is selected:
The copier is not set into the Enemy Saving Mode after the given time.
If "1" is selected:
The copier is automatically set into the Energy Saving Mode after the given
time. The time it takes the copier to enter the Energy Saving Mode can also
be selected from among 1 to 10 min.
Setting
Value
Description
Initial
Setting
Setting
Value
Description
Initial
Setting
0
Energy Saving Mode
disabled
O
6
Energy Saving Mode
enabled (6 min.)
1
Energy Saving Mode
enabled (1 min.)
7
Energy Saving Mode
enabled (7 min.)
2
Energy Saving Mode
enabled (2 min.)
8
Energy Saving Mode
enabled (8 min.)
3
Energy Saving Mode
enabled (3 min.)
9
Energy Saving Mode
enabled (9 min.)
4
Energy Saving Mode
enabled (4 min.)
10
Energy Saving Mode
enabled (10 min.)
5
Energy Saving Mode
enabled (5 min.)
U-23 Auto panel reset for Plug-In Counter
•
Determines whether or not to the copier is set into the initial mode when the
Plug-In Counter is pulled out after a copy cycle has been run using the Plug-In
Counter.
Setting Value Description Initial Setting
0 Copier is not initialized.
1
Copier is initialized when the Plug-In Counter is
pulled out.
O
4. User’s Choice
Chapter 4
Special Function
101