Minolta FLASH METER VI User Manual

E45
Special Functions
S/A/H (Shadow/Average/Highlight)
calculations
The Flash Meter VI provides three types of exposure calculations
(highlight-based exposure, shadow-based exposure, and average
exposure) suited to the nature of the photographic image. These are based
on spot measurements of specific areas of the subject. The average
exposure calculating function also works for incident light measurement.
For incident light measurement, exposure calculation is based on incident
light measurement memory data. For spot measurement, it is based on
spot measurement memory data.
Special Functions
E44
● Data on up to ten
measurements can be stored in
memory.
The pointer of the analog scale
can simultaneously display data
on up to eleven measurements
(including ten measurements in
memory and the one
measurement taken most
recently).
● If the memory contains data on
ten measurements, pressing the
MEMORY button again causes
the "Err" code to be displayed
while the MEMORY button is
being pressed. The current data
will not be stored in memory.
● If you change film speed or
shutter speed after pressing the
MEMORY button, the stored
values are changed accordance
to the new setting. (These
changes are also reflected on
the analog scale.)
● If there is no reading on the
digital readout, or if the current
reading is out of the meter's
measurement range, pressing
the MEMORY button does not
have any effect.
● To delete all values from
memory, press the CLR button.
◆ The measured value is
displayed on the digital display.
If the latest measurement is an
incident light measurement, the
pointers corresponding to the
measured value on the digital
display appear on the analog
scale L. If it is a spot
measurement, the pointers
corresponding to the measured
value on the digital display
appear on the analog scale R.
◆ The memory data from the
latest measuring method are
displayed on the pointer. If the
latest measurement is an
incident light measurement, the
memory data on incident light
measurement are displayed on
the pointer of the analog scale
L. If it is a spot measurement,
the memory data on spot
measurement are displayed on
the pointer of the analog scale
R.
Example: When the latest
measurement is a spot
measurement:
flashmetervieng.qx3302.12.259:21PMページ44

Minolta FLASH METER VI Specifications

General

Brand	Minolta
Model	FLASH METER VI
Category	Measuring Instruments
Language	English