Minolta FLASH METER VI User Manual

E55E54
Special Functions
Measured value for the point
monitored
(When AMBI mode is selected,
the meter continuously takes
measurements as long as the
measuring button is held down.
The positions of the lit dots
change with the measurement
result.)
Indicates that the exposure of the
monitored point is less than the
fixed measurement result by 1.5
stops.
(When AMBI mode is selected,
the meter continuously takes
measurements as long as the
measuring button is held down.
The dot lighting position changes
according to the measurement
result.)
The display returns to the fixed
measurement result display mode.
Measured value for the point
monitored
(When AMBI mode is selected,
the meter continuously takes
measurements as long as the
measuring button is held down.
The positions of the lit dots
change with the measurement
result.)
Indicates that the exposure of the
monitored point is less than the
fixed measurement result by 1.5
stops.
(When AMBI mode is selected,
the meter continuously takes
measurements as long as the
measuring button is held down.
The dot lighting position changes
according to the measurement
result.)
Measured value for the point
monitored
(Measurement taken when the
measuring button is released)
The display returns to the fixed
measurement result display mode.
When the measuring
button is released:
Special Functions
If the incident light measuring button is used to take the
measurement described in Step 1 and to monitor the exposure
difference:
When the measuring
button is released:
If the spot measuring button is used to take the measurement
described in Step 1 and to monitor the exposure difference:
Fixed
measurement
result
Fixed
measurement
result
Fixed
measurement
result
Fixed
measurement
result
flashmetervieng.qx3302.12.259:21PMページ54

Minolta FLASH METER VI Specifications

General

Brand	Minolta
Model	FLASH METER VI
Category	Measuring Instruments
Language	English