Minolta FLASH METER VI User Manual

E69E68
Special Functions Special Functions
FNo. 000:
Displays intermediate
readings between f-
numbers as FNo. +
1/10 stops.
EV 00.
0:
Displays an EV value
in 1/10-stop
increments.
● The pointer of the
analog scale
displays "FNo.,"
even when the
display unit is set
to "EV."
● When CORD or
NON CORD mode
is selected, the
display mode is set
to "FNo.00
0".
FNo. 0.0:
Displays direct
reading of an
intermediate reading
between f-numbers.
(e.g., F3.5, F4.5)
2) Shutter speed increments
Choose between increments of 1/2-stop, 1/3-stop and 1-stop, according
to the shutter speed settings your camera.
1
Turn the power on while
pressing the ISO button, or
press the ISO button in Alt
mode.
2
Turn the up/down dial to
set the step value.
● Choose from values of 1.0 (1),
0.5 (1/2) and 0.3 (1/3).
3) Display unit
Select the desired display unit.
1
Turn on the power while
pressing the S/H/A button,
or press the S/H/A button
in Alt mode.
2
Select the desired display
unit with the up/down dial.
● Select any of the following
display modes:
flashmetervieng.qx3302.12.259:21PMページ68

Minolta FLASH METER VI Specifications

General

Brand	Minolta
Model	FLASH METER VI
Category	Measuring Instruments
Language	English