EasyManua.ls Logo

Minuteman E20S - Battery Charger Trouble Shooting

Minuteman E20S
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8.3 Battery Charger Trouble Shooting
Version 1 and 2 Chargers
1. Does the battery charger turn on when plugged into the A.C. outlet?
2. Can you hear the cooling fan turn on? If not, check the A.C. outlet for
power.
3. Try a different outlet, if needed.
4. If it still doesn’t turn on, inspect the A.C. cord. Repair if needed.
5. Inspect the A.C. cord.
6. If the A.C. cord is Ok, check to see if the battery connector has been
plugged in to the machines connector.
6. Inspect the battery cables. Make sure they are clean and tight.
7. Test the voltage of the batteries; it must be above two volts minimum, before
the charger will turn on.
8. If everything above checks OK, and the charger still doesn’t turn on or
doesn’t have any output, replace the battery charger.
Trouble Shooting
Page 21

Related product manuals