8.8 Prime Charge Status Indicator
• The charger includes one (1) local LED that can display three (3) colors to indicate charger status and fault
information (see Figure 5-1). The functionality of the LED is outlined below. If an optional remote LED is
being used, it will provide the same functionality.
• Amber (Charge Status) Indicates charge cycle status. See Figure 13-1 for descriptions of the possible
states.
• Green (Charge Status) Indicates when a charge cycle completes successfully, when an extended
Balance/Equalize charge cycle phase is active, or when a post-charge phase is active.
See Figure 13-1
for descriptions of the possible states.
• Red (Fault) Indicates when a charger or battery
fault has occurred. See the FAULTS section.
Page 30
To Next Page
Loading...
