Regularly scheduled lubrication of certain machine parts should
be performed to insure trouble-free
operation of the machine. Apply a generous amount of grease
into the fittings on the machine until grease
seeps out around the bearings. Wipe excessive grease off with
a towel.
The grease points are listed below:
1. Rear squeegee caster wheel axle (2)
2. Rear squeegee caster swivel (2)
Apply lubricant to:
1. The rear squeegee pivot points
2. The scrub deck linkages.
6. Lubrication
Page 16
To Next Page
Loading...
