24
· Ensure that the headlight does not shine in the eyes of road users that are facing you.
The light can dazzle other road users, which may lead to accidents.
· Always try out the brakes during the test cycle so you know how hard you must
squeeze and how powerful the brakes are. Disc brakes are more powerful than
traditional brakes. Always keep in mind which brake levers operate the front and the
rear brakes.
· Only use the walk assist mode while walking with your e-bike. Keep your legs clear from
the pedals.
· Only use your e-bike with both wheels in contact with the ground.
· Only use your e-bike for one person cycling.
· Always (un)fold your e-bike away from you to prevent entrapment and to make (un)
folding easier.
· Always ensure both frame halves are connected when the frame is folded. If both
frame halves are not connected properly, the frame may unfold unexpectedly.
NOTICE
· Consult local regulations for the registration and use of e-bikes on public roads.
· Always handle your e-bike with care to avoid damaging the paintwork.
· Do not use sharp objects such as a knife or scissors when opening the packaging to
avoid damaging the paintwork.
· Always fold the pedals before folding the frame to prevent damaging the frame.
· Always press the safety catch when unlocking the frame latch to prevent damaging the
frame latch.
· Do not force the battery into the frame. Always ensure the battery is the correct way
around. Do not attempt to install the battery the wrong way around. Do not attempt to
remove the battery whilst locked into place.
· Always correctly and fully insert the battery into the frame. Inserting the battery
incorrectly or incompletely into the frame may damage the battery or the frame.
To Next Page
Loading...
