Mitel 5324 User Guide Supplement

Embedded Screen Saver
Mitel
®
5000 CP Phone User Guide Supplement for v3.2, September 2009 Page 15
b. If desired, enable the Display Image option:
o If you enable the Display Image option, the screen saver image appears and
your backlight dims when your phone enters screen saver mode, as specified
by the screen saver timeout setting.
o If you disable the Display Image option, only your backlight dims (if your
phone has a backlight) when your phone enters screen saver mode, as
specified by the screen saver timeout setting. This is the default setting.
c. Configure brightness options if your phone has a backlight (all 5340 and newer 5330
phones).
Options include:
o Brightness+: Increases the brightness of the display when your phone is in
screen saver mode.
o Brightness-: Decreases the brightness of the display when your phone is in
screen saver mode.
o Show Brightness: Shows the brightness level of the display when your
phone is in screen saver mode. The display returns to normal after
approximately two seconds.
4. Press Save.
5. Press Close to exit the Applications menu.
To wake your phone from screen saver mode:
Lift the handset or press any button to wake the phone.

Mitel 5324 Specifications

Processor and Memory

processor type	TNETV1055 (MIPS)
processor speed	125 MHz
DSP speed	165 MHz
RAM	16 MB
ROM	8 MB

Weight and Dimensions

dimensions (phone only)	9.1 in x 7.5 in x 3.5 in (23 cm x 19 cm x 9 cm)
weight (phone only)	1.65 lbs or 0.75 kg
dimensions (packaged)	9.8 in x 8.3 in x 3.9 in (25 cm x 21 cm x 10 cm)
weight (packaged)	2.49 lbs or 1.13 kg