Mitsubishi Electric FR-F740-00023

264
Parameter copy and parameter verification
4.25.2 Parameter verification
&#885#+-666P"'|& d#+#?505+&+5#9&5++(+6&d5+*(+?&(85+#0.($&*+(?&-058&_&#/#.$6
&#885#+-666P"'|& d#+#?505+&C+.05&5++(+6&d5+*(+?&(85+#0.($&*+(?&-058&G&#/#.$6
&#$9& &*7.,%5+&#705+$#057'
L885#+-&C"5$&8#+#?505+-&#+5&,(8.59&250C55$&0"5&.$45+05+&(*&>FFE>&(+&75--&#$9&>FG>>&(+&?(+56
F6 b50&O>O&.$&Pr. 160 User group read selection6
]6 b50&0"5&*(77(C.$/&-500.$/&[.$.0.#7&4#7)5\&.$&Pr. 989 Parameter copy alarm release6
_6 ;5-50&Pr. 9, Pr. 30, Pr. 51, Pr. 52, Pr. 54, Pr. 56, Pr. 57, Pr. 70, Pr. 72, Pr. 80, Pr. 90, Pr. 158, Pr. 190 to Pr. 196, Pr. 557,
Pr. 8936
P"50"5+&-#?5&8#+#?505+&4#7)5-&#+5&-50&.$&(0"5+&.$45+05+-&(+&$(0&,#$&25&,"5,%596
D$O:Db+
P"5$&0"5&,(8'&95-0.$#0.($&.$45+05+&.-&$(0&0"5&:;<:=>>&-5+.5-B&O?(957&5++(+&[ \O&.-&9.-87#'596
&*7.,%5+-&666&P"'|
b50&*+5K)5$,.5-B&50,6&?#'&25&9.**5+5$06&S"5,%&-50&*+5K)5$,.5-6
X!!NX#-)#%&== X!\XX#-)#B-)&
d+6&HGH&b500.$/ F> F>>
• Hold down to verify.
2.Screen at powering on
The monitor display appears.
Display
Operation
7.Press to read the parameter setting
of the verified inverter to the operation panel.
1.Move the operation panel to the
inverter to be verified.
• Move it during a stop.
Flicker ··· Parameter verification complete!!
4.Turn until (parameter copy)
appears.
6.Turn to change it to the set value
" "(parameter copy verification mode).
8.If there is no difference, and
flicker to complete verification.
The frequency flickers
for about 30s
Flickering
• If different parameters exist, different
parameter numbers and flicker.
The parameter
number read
previously appears.
5.Press to read the present set
value.
" "(initial value) appears.
3.Press to choose the parameter
setting mode.