Mitsubishi Electric FR-F740-00023

54
Operation panel (FR-DU07)
4.1.3 Changing the parameter setting value
4.1.4 Setting dial push
d)-"&0"5&-500.$/&9.#7&[ \&0(&9.-87#'&0"5&-50&*+5K)5$,'&,)++5$07'&-506
S"#$/.$/&5@#?875 S"#$/5&0"5&Pr. 1 Maximum frequency&6
&#+5&9.-87#'59&666&P"'|
&#885#+-6&666666 P+.05&9.-#275&5++(+
&#885#+-6&666666 P+.05&5++(+&9)+.$/&(85+#0.($
&#885#+-6&666666 S#7.2+#0.($&5++(+
&#885#+-6& 66666 1(95&95-./$#0.($&5++(+
:(+&950#.7-&+5*5+&0( page 2706
D$O:Db+
 !"5&$)?25+&(*&9./.0-&9.-87#'59&($&0"5&(85+#0.($&8#$57&[:;<NT>=\&.-&*()+6&U$7'&0"5&)885+&*()+&9./.0-&(*&4#7)5-&,#$&25&9.-87#'59
#$9&-506&3*& 0"5&4#7)5-&0(&25&9.-87#'59& "#45&*.45&9./.0-&(+&?(+5&.$,7)9.$/&95,.?#7& 87#,5-B& 0"5&*.*0"&(+& 7#05+&$)?5+#7-&,#$$(0&25
9.-87#'59&$(+&-506
[W@#?875\&P"5$&Pr.1
P"5$&E>kV&.-&-50B&E>6>>&.-&9.-87#'596
P"5$&F]>kV&.-&-50B&F]>6>&.-&9.-87#'596&!"5&-5,($9&95,.?#7&87#,5-&,#$$(0&25&9.-87#'59&$(+&-506
1.Screen at powering on
The monitor display appears.
Display
Operation
3.Press to choose the parameter
setting mode.
4. Pr. 1) appears.
Flicker ··· Parameter setting complete!!
7.Press to set.
5.Press to read the present set value.
" "(initial value) appears.
6.
Turn to change it to the set
value " ".
PU indication is lit.
2.Press to choose the PU operation
mode.
· Press to show the setting again.
· Press twice to show the next parameter.
· Turn to read another parameter.
The parameter
number read
previously appears.
· Press twice to return the monitor to frequency monitor.
to