1 General configuration
Contents of the Option equipment and special specification 1-6
[Reference]:The recommendation products of the USB cable are shown below.
Table 1-4 ： Recommendation article of the USB cable
Be careful to the USB cable to apply neither the static electricity nor the noise.
Otherwise, it becomes the cause of malfunction.
Use the network equipments (personal computer, USB hub, LAN hub, etc) confirmed by
manufacturer. The thing unsuitable for the FA environment (related with conformity,
temperature or noise) exists in the equipments connected to USB, RS-232 or LAN. When
using network equipment, measures against the noise, such as measures against EMI and
the addition of the ferrite core, may be necessary. Please fully confirm the operation by
customer. Guarantee and maintenance of the equipment on the market (usual office
automation equipment) cannot be performed.
Note2) This option only applies to the CR2DA-700 series controller.
Note3) One 2D-TZ378(Source type) is installed for CE Marking specification at shipping. (Only "-S12" specification)
Note4) The recommendation products of the USB cable are shown in Table 1-4.
Name Type name Supplier
USB cable
(USB A type-USB mini B type)
KU-AMB530 SANWA SUPPLY INC.
USB-M53 ELECOM CO., LTD.
GT09-C30USB-5P MITSUBISHI ELECTRIC SYSTEM & SERVICE CO., LTD.
MR-J3USBCBL3M MITSUBISHI ELECTRIC CO., LTD.
USB adapter
(USB B type-USB mini B type)
AD-USBBFTM5M ELECOM CO., LTD.
Caution
Caution
To Next Page
Loading...
