5 Maintenance and Inspection
Resetting the origin
5-181
8) Input "1" into the axis to origin setting. Press
the [EXE] key, and display Confirmation screen.
9) Press the [F1] key, and the origin position is set
up.
The origin settings are completed by the user origin method.
<USER>
J1:(
1 )J2:( 0 )J3:( 0 )
J4:( 0 )J5:( 0 )J6:( 0 )
J7:( 0 )J8:( 0 )
CLOSE
123
REL.
<ORIGIN> USER
CHANGE TO ORIGIN. OK?
No
123
Yes
To Next Page
Loading...
