3 PROGRAMMABLE CONTROLLER SETTINGS
3.6 Adding Structures and Global Labels
32
3
Addition of structures (labels)
1.
Right-click on [Structured Data Types] in [Label], and select [Add New Data]. Input "stRemoteReg"
*1
for "Data Name",
and click [OK].
2.
Set labels for the structure as shown below. For how to input the label names and comments (English), refer to Page
30 Addition of global labels 1.
Label Name
*2
Data Type English
bnRX Bit (0..127) RX information
bnRY Bit (0..127) RY information
unRWr Word [Unsigned]/Bit String [16-bit] (0..63) RWr information
unRWw Word [Unsigned]/Bit String [16-bit] (0..63) RWw information
To Next Page
Loading...
