17 COMMUNICATING WITH ASCII CODE (ASCII-BIN CONVERSION)
17.1 ASCII-Binary Conversion
347
17
17 COMMUNICATING WITH ASCII CODE (ASCII-
BIN CONVERSION)
This chapter explains the ASCII-binary conversion in order to transmit/receive data in ASCII code to/from a target device.
17.1 ASCII-Binary Conversion
ASCII-BIN conversion is the data conversion function that converts all data communicated between C24 and a target device
to ASCII code data.
The ASCII-BIN conversion of data to be sent/received is performed by C24 according to the parameter settings.
17.2 Settings for ASCII-BIN Conversion
In order to convert data to be sent/received with the nonprocedural protocol and bidirectional protocol from binary code to
ASCII code, it is necessary to configure the setting for C24 before performing data communication.
The settings for ASCII-BIN conversion are as shown below:
• The ASCII-BIN conversion settings can be configured for each interface.
• To enable ASCII-BIN conversion, set "ASCII-BIN conversion designation" to "ON".
Navigation window [Parameter] [Module Information] "Module Name" [Module Parameter] "Basic Settings"
"Various control specification"
1234
H
31
H
34
H
33
H
32
H
38
H
35
H
36
H
37
H
12
H
34
H
78
H
56
H
5678
H
CPU module
C24 Target device
With ASCII-BIN conversion
Without ASCII-BIN conversion
To Next Page
Loading...
