Mitsubishi Electric MELSEC iQ-RJ71C24-R2 - Example of Data Reception

17 COMMUNICATING WITH ASCII CODE (ASCII-BIN CONVERSION)
17.4 Data Communication Using Nonprocedural Protocol
351
17
Example of data reception
Program example
The following shows an example of data reception.
For information on the module FB to be used, refer to the following manual.
MELSEC iQ-R Serial Communication Module Function Block Reference
Category Label name Description Device
Module label C24_1 Target module 
C24_1.stnCH1.bSet_Req_ReceptionRead CH1 Reception data read request X3
C24_1.stnCH1.bSts_ReceptionAbnormalDetection CH1 Reception abnormal detection X4
Label to be defined Define the global label as shown below.
(0) Set the reception channel to CH1.
Set the allowable number of data to be received to 6.
Set the reception direction.
(7) Execute reception.
(53) Normal completion
(55) Abnormal completion