Mitsubishi Electric MELSEC iQ-RJ71C24-R2 - Page 398

396
20 USING SEND/RECEIVE DATA MONITORING FUNCTION
20.3 Send/receive Data Monitoring Example
Confirming monitor data with Engineering tool
Monitor the monitor data area on the CH1 side (Un\G9730 to 13055) with the Device/Buffer Memory Batch Monitor function of
Engineering tool.
For the data configuration of the monitor data area, refer to the following section.
Page 393 Monitor data area (Un\G9730 to 13055/13058 to 16383(default))
Ex.
Monitoring example when the following data is transmitted from CH1 for data communication using the nonprocedural
protocol.
Send data; "ABCDEFGH" + 0D0AH (5-word)
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
00010011 00010100
DR
(DSR)
CS
(CTS)
CD
(DCD)
When transmitting
data
* System area
Transmission data
*