133
16.5.4. Forecast (Belt)
When [Belt] is seen in Item, the "hours until belt replacement time" can be checked for each axis.
If the hours until belt replacement time has reached
(Hours until belt replacement time)
< ([The remainder days until presumed maintenance time] on the Setup screen)
x ([Operation time of a day]),
the hours and bar graphs are displayed in orange.
The display unit setting can be switched between time and day.
If day is selected in the display unit setting, the display will show the number of days in operation based
on the operating hours per day.
When t
he [Ref
resh] butt
on (<a>
) is
tapped on in upp
er
-r
ight cor
ner of t
he window
, the inf
ormation about
the
maintenance is acquired again from the controller.
To Next Page
Loading...
