216
19.1.5.9. Message
Set the message when message is displayed by the state of the I/O signal.
(1)
Select
[Message]
button (<a>
).
When [
Message] butt
on is not
displayed ther
e, please t
ap [Line] but
ton.
(2) After "Message list" window is displayed, select [Add] button (<b>).
(3) After "Message editor" window is displayed, set [Message] and [Displaying condition], etc. Tap [OK] button
(<d>).
Select [Edit] button (<c>) , and message can be edited.
To Next Page
Loading...
