50
11.1.12. Search
If the program of the USB memory is being edited, the specification character string can be searched with
command edit. It can be specified whether the capital letter/small letter is differentiated or not.
1) Taps the [Menu] button and select the "Find" (<a>) of the command edit screen, the setting screen will be
displayed.
The line of code selected beforehand is inputted into "Find what" as a specification character string.
2) The input of the character string to search, taps the [Edit] button (<b>), and keyboard displayed is used.
The inputted character is displayed on "Find what". (<c>)
Tap the [Enter] key (<d>) of the keyboard to finish the input.
3) Tap the [Find next] button (<e>) to start search of the character string. If the specified character string is
found, indicate the line by the highlight.
To Next Page
Loading...
