54-62
CHASSIS ELECTRICAL
-
Lighting System
OPERATION
l
When the fog light switch is placed in the ON position with the lighting switch in the HEAD position
and the dimmer switch in the LO position, current flows through the dedicated fuse (4) to the coil
of the fog light relay, the fog light switch, the dimmer switch and ground, causing the contacts of
the fog light relay to close.
When the contacts of the fog light relay close, current flows through the dedicated fuse (4) to the
contacts of the fog light relay, the fog lights and ground, causing the fog lights to come on.
l
When the dimmer switch is placed in the HI position or the lighting switch is placed in the TAIL or
OFF position while the fog lights are ON, current supply to the fog light relay or headlight relay is
cut off. As a result, the contacts of the fog light relay open, and the fog lights go out.
NOTE
The fog lights are included in the light automatic shut-OFF system. (Refer to
P.54-37).
The indicator lights
are also included in the same system.
Fog Lights Operation Conditions
Fog light switch
Lighting switch
Dimmer switch Fog lights
ON position
1
OFF position or TAIL posi-
1
LO position
1
OFF
tion
HEAD position
HI position
LO position
OFF
ON
HI position
I
OFF
TROUBLESHOOTING HINTS
1. The right or left fog lights only go on.
0
Check the bulb.
2. Fog lights do not go on when the fog light switch is set at ON.
0
Check the dedicated fuse (4).
0
Check the fog light relay. (Refer to
P.54-108).
0
Check the fog light switch.
NOTE
For the light automatic shut-OFF system troubleshooting hints, refer to
P.54-38.
1
TSB Revision