CIRCUIT DIAGRAMS
-
How to Read Circuit Diagrams
65
Item
No.
Connector
/
Grounding Symbol
Contents
Connector
1
Male terminal
For the terminal symbols, the
con-
and termi-
netted terminal is indicated as the
nal
marking
male terminal, and the receptacle
ter-
minal is indicated as the female termi-
nal
as shown in the illustration.
Male connector
The connector in which the male ter-
minal is assembles is indicated as the
A16R0001
male connector and the connector in
which the female is assembled is
indi-
-
cated
as the female connector. The
Female connector
Female terminal
connector symbols shown the male
T
connector with a double outer contour
line and the female connector with a
Female
single outer contour line.
terminal
Female connector
AWR0002
I
Connector 2
Device
symbol
marking
:6A~c333
-
Connector 3
Direct connection type
connection
marking
4
Hams
16A0334
I
I
The symbol indicates the connector
as viewed from the illustrated
direc-
tion. At the connection with a device,
the connector symbol on the device
side is shown, and for an intermediate
m/
bolisshown
connector, the male connector
sym-
For the connectors which are not con-
netted
to any appliance (spare termi-
nal, terminal for inspection), the con-
nectors at the harness side are
shown.
A connection between a device and
connector on the harness
side
is
ei-
ther by direct insertion in the device
(direct connection type) or by connec-
tion with a harness connector fur-
nished on the device side (harness
/
,
t
~
connection type). The two types are
indicated as illustrated.
5
Intermediate connector-
I
SA0339
TSB Revision
To Next Page
Loading...
