Mitsubishi 3000GT - Page 716

54-220
CHASSIS ELECTRICAL - Theft-alarm Svstem
With voltmeter
Data link connector
\‘%S$F
- Data link t Ground ETACS z16R1338
When using the MUT-II
4Jp to 1993 models>
Y2OFO164
00002231
TROUBLESHOOTING GUIDE
CHECKING THE INPUT
<Up to 1993 models>
When using the scan tool (MUT) or voltmeter
1. Connect a voltmeter between terminal for ETACS and
terminal for ground, or connect the scan tool to the data
link connector.
‘d
<All models>
When using the scan tool (MUT-II)
1. Connect the scan tool to the data link connector. When
connecting the scan tool to a vehicle up to 1993 models,
use the adapter harness supplied together.
Caution
Turn off the ignition switch beforehand whenever the
scan tool is connected or disconnected.
vi
UZOFOlfX3
<From 1994 models>
When using the voltmeter
1. Connect a voltmeter to the ETACS terminal and the ground
terminal of the data link connector using the special tool.
1 TSB Revision