Mitsubishi 3000GT - Page 724

54-228
CHASSIS ELECTRICAL - Theft-alarm Svstem
7. LIFTGATE SWITCH INPUT CIRCUIT
Description of operation
When the liftgate is closed (the liftgate switch is switched
ROFF), HIGH-level signals are sent to the ECU. When the
liftgate is opened (the liftgate switch is switched R ON), LOW-
level signals are sent to the ECU.
ECU terminal voltage (Connection condition of the ECU con-
nector).
ECU
terminal No.
Signal
I
Condition
Terminal
voltage
17
Liftgate
switch
_
l
Measurement is not possible by using a voltmeter, but is possible
by using an oscilloscope.
1 TSB Revision