Mitsubishi ASX 2019

Screen type 1 Screen type 2 Cause Solution (Reference)
—
(flashing in yellow)
l
The Lane Departure Warning
(LDW) has detected that your
vehicle is about to leave or
has left the lane.
Refer to “Lane Departure Warning
(LDW)” on page 6-61.
—
l
There is a fault in the Lane
Departure Warning (LDW).
l
We recommend you to have it
checked. Refer to “LDW de-
activation due to fault” on
page 6-63.
—
l
The Blind Spot Warning
(BSW) sensor is temporarily
not available for some reason
such as the environmental
condition or increase of the
sensor temperature.
l
When the warning display
does not disappear after wait-
ing for a while, contact a
MITSUBISHI MOTORS Au-
thorized Service Point.
Refer to “When the sensor is
temporarily not available” on
page 6-58.
—
l
The Blind Spot Warning
(BSW) does not operate nor-
mally because there are some
malfunctions in the sensor or
the system.
l
We recommend you to have it
checked, immediately.
Refer to “When there is a
malfunction in the system or
the sensor” on page 6-58.
Indication lamp, warning lamp, and information screen display list
5-39
OGAE19E1
Instruments and controls
5