Screen type 1 Screen type 2 Cause Solution (Reference)
—
l
Foreign objects, such as dirt,
snow or ice, adhere to the
bumper surface around the
sensor.
l
Remove a foreign object on
the bumper surface around the
sensor.
When the warning display
does not disappear after hav-
ing cleaned the bumper sur-
face around the sensor, con-
tact a MITSUBISHI
MOTORS Authorized Service
Point.
Refer to “Blind Spot Warning
(BSW): When there is a for-
eign object on the sensor” on
page 6-58.
—
(flashing in yellow)
l
The Rear Cross Traffic Alert
(RCTA) has detected a vehi-
cle that is approaching your
vehicle.
l
Pay special attention to the
rear of your vehicle.
Refer to “Rear Cross Traffic
Alert (RCTA)*” on page
6-59.
Indication lamp, warning lamp, and information screen display list
5-40
OGAE19E1
Instruments and controls
5