Mitsubishi ASX 2019

Screen type 1 Screen type 2 Cause Solution (Reference)
—
l
There is a fault in the sensor.
l
We recommend you to con-
sult a MITSUBISHI
MOTORS Authorized Service
Point.
Refer to “Forward Collision
Mitigation system (FCM):
System problem warning” on
page 6-52.
Refer to “Lane Departure
Warning (LDW): System
problem warning” on page
6-63.
—
l
The Forward Collision Miti-
gation system (FCM) and
Lane Departure Warning
(LDW) is temporarily un-
available due to the high or
low temperature of the sensor.
l
After the temperature of the
sensor has been in range, the
system will automatically re-
turn to operation.
Refer to “Forward Collision
Mitigation system (FCM):
System problem warning” on
page 6-52.
Refer to “Lane Departure
Warning (LDW): System
problem warning” on page
6-63.
—
l
The sensor is temporarily un-
available due to conditions
such as the adhesion of con-
taminants to the sensor or
windscreen.
This is not a malfunction.
Refer to “Forward Collision Miti-
gation system (FCM): System
problem warning” on page 6-52.
Refer to “Lane Departure Warning
(LDW): System problem warning”
on page 6-63.
Indication lamp, warning lamp, and information screen display list
5-41
OGAE19E1
Instruments and controls
5