(_) volume controls
(VOL)
Press the • button to turn up the volume and the • button to
turn down the volume.
(_) channel controls (CHANNEL)
Use the • button to switch to a channel with a higher number
and the • button to switch to a channel with a lower number.
(_) input buttons (INPUT)
Use either button to select the input source to be viewed:
• Antenna A,
• Antenna B, or
• External 1, 2, or 3.
© audio and video controls
These buttons are used in pairs to adjust features of the image
or sound (other than volume)with a two-step process: using one
of the audio or video buttons to select a function, and then using
an adjust button.
audio function buttons (AUDIO)---Use to select one of the
following audio functions:
-stereo/SAP/mono,
-bass,
-treble,
-balance,
-audio expansion,
-level sound on/off,
-speaker internal/external, or
-monitor out variable/fixed.
video function buttons (VIDEO)---Use to select one of the
following video functions:
-tint,
-color,
-contrast,
-brightness,
-sharpness,
-video noise reduction on/off,
-color temperature low/middle/high,
-color bias average/accurate/skin-tone, or
-closed captioning.
adjust buttons (ADJUST)---After selecting the audio or video
function, use either the up or the down button to adjust the
function you've selected. These buttons can be used to:
-turn the function on or off (e.g., video noise reduction),
-increase or decrease the function (e.g., color),
-shift from one end of a scale to the other (e.g, balance), or
-select a position (e.g., stereo).
The adjust buttons are also used to select an item from the
on-screen menu.
Overview of the Control Panel 17
To Next Page
Loading...
Need help?
General
