Changing channels
Your TV offers you four ways of changing channels once their
numbers have been programmed into channel memory.
• selecting a channel using the automatic channel scan feature.
• directly accessing a channel by pressing the number buttons.
• using the quick view option to switch to the special memorized
channel, and
• using the Super Quick View function to alternal;e between
special channels programmed for quick viewing.
Y'Important: To change channels faster, use either of the following procedures::
Important:
• Enter three digits for every channel number, usling zeros where
needed. (For example, enter "004" to view channel 4 and "028"
to view channel 28.)
• Press the ENTER button after selecting the number of the
channel. (For example, press "4" and "ENTER' to view channel
4.)
Cable channels numbered 0 and greater than 126 are unassigned
TV stations 0, 1 and 70 through 999 are unassigned. If these chan-
nel numbers are pressed, the channel remains unc:hanged.
54 Chapter 3 : Operating Your TV
To Next Page
Loading...