audio function button (AUDIO)---Use to select one of the
following audio functions:
-stereo/SAP/mono,
-bass,
-treble,
-balance,
-audio expansion,
-level sound on/off,
-speaker internal/external, or
-monitor out variable/fixed.
video function button (VIDEO)---Use to select one of the
following video functions:
-tint,
-color,
-contrast,
-brightness,
-sharpness,
-video noise reduction on/off,
-color temperature low/middle/high,
-color bias average/accurate/skin-tone, or
-closed captioning.
adjust up/down buttons, right/left buttons---After selecting
the audio or video function, use either the up (right) or the down
(left) button to adjust the function you've selected. These buttons
can be used to:
-turn the function on or off (e.g., video noise reduction),
-increase or decrease the function (e.g., color),
-shift from one end of a scale to the other' (e.g., balance), or
-select a position (e.g., stereo).
You will also use the adjust buttons to select items on the on-
screen menus.
(_) menu button (MENU)
Use this button to display tile on-screen menu system, which
contains additional instructions tbr special functions.
(_) cancel button (CANCEL)
This button is used to cancel the entered channel number within
three seconds, to erase the parental lock code during the paren-
tal lock sequence, to clear a channel pro_Fammed into super
quick view memory, and to clear the settings of some on-screen
menus.
(_) display button (DISPLAY)
Use to view an on-screen summary of the current TV sc_ttings for
TV or cable functions, and the display related to Extended Data
Services (XDS).
Overview of the Remote Control 23
To Next Page
Loading...