Troubleshooting (cont.)
Problems Possible Solutions
For More Information
The remote control doesn't
work,
• Check that the batteries are
installed correctly.
See "Getting ready to use
the remote control" in
Chapter 1 for an explana-
tion of how to install batter-
ies in tile remote control.
Check the select button is
set to TV.
See "Remote control but-
tons and functions" in
Chapter 1, which explains
where the select buttoa is
located.
Be sure that you are point-
ing the top of the remote
control toward the TV from
a distance of no more than
20 feet.
See "Getting ready to use
the remote contror' in
Chapter 1, which contains
pointers :for using the
remote control.
The TV takes several sec-
onds to respond to button
commands.
Use the ENTER button to
avoid delays.
See "Changing channels" in
Chapter 3, which explains
the function of the ENTER
button.
You can't access a channel. Be sure that the channel
you want to view is pro-
grammed into memory.
Check that the TV is tuned
to the correct input source
(antenna) for that channel.
See "Memorizing chaanels"
in Chapl;er 3, which explains
how to program channels
into tile TV's memory.
See "Selecting the input
source" in Chapter 3_ which
explains how to change the
input source.
96 Chapter 5: Troubleshooting
To Next Page
Loading...