C H A P T E R 4
P A R A M E T E R S
This chapter explains the "parameters" of this product.
With the factory settings, the inverter is designed to perform
simple variable-speed operation. Set necessary parameter
values according to the load and operating specifications.
Always read the instructions before using the equipment.
4.1 Parameter List ..........................................................68
4.2 Parameter Function Details ...................................... 76
Note : By making parameter setting, you can change the functions
of contact input terminals MRS and contact output terminals
A, B, C. Therefore, signal names corresponding to the
functions are used in the description of this chapter (except
in the wiring examples). Note that they are not terminal
names.
CHAPTER 4
PARAMETERS
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
To Next Page
Loading...
