Mitsubishi FREQROL-E700

App.1-6
Parameter Name Setting range Initial value
C24
(923)
*6 *7
Frequency setting
voltage gain
frequency (built-in
potentiometer)
0 to 400Hz 60Hz
C25
(923)
*6 *7
Frequency setting
voltage gain (built-in
potentiometer)
0 to 300% 100%
990 PU buzzer control 0, 1 1
991
PU contrast
adjustment
0 to 63 58
Pr.CL Parameter clear 0, 1 0
ALLC All parameter clear 0, 1 0
Er.CL Faults history clear 0, 1 0
Pr.CH
Initial value change
list
— —
*1 Differ according to capacities .
6%: 0.75K or less, 4%: 1.5-3.7K, 3%: 5.5 and
7.5K, 2%: 11 and 15K
*2 Differ according to capacities.
5s: 3.7K or less, 10s: 5.5 and 7.5K,
15s: 11 and 15K
*3 Differ according to capacities.
6%: 0.1 and 0.2K, 4%: 0.4-7.5K,
2%: 11 and 15K
*4 Differ according to voltage class. (100, 200, and
400V classes)
*5 The range differs according to the Pr. 71
setting.
*6 Set this parameter when calibrating the
operation panel built-in potentiometer for the
FREQROL-E500 series operation panel (PA02)
connected with cable.
*7 The parameter number in parentheses is the
one for use with the operation panel (PA02) for
the FREQROL-E500 series or parameter unit
(FR-PU04/FR-PU07).
*8 Available only for the three-phase power input
model.