12-10 Simple inspection and service
Range selector lever
<Automatic transmission vehicle>
Set the starter switch in ON position but not start the
engine.
• Check if the range selector lever operates
smoothly and clicks at each range position
(“P” position through “2” position).
• Check if the shift indicator lamp in the meter clus-
ter indicates the selected range.
• Set the range selector lever to “P” position. Turn
the starter key to LOCK position and check if the
key can be removed from the key cylinder.
P. 1 2 - 4 7
Engine conditions
Check the engine for smooth starting and quiet
running.
Parking brake lever stroke
Check that the parking brake lever stroke is 7
to 9 notches.
P. 1 2 - 51
Service brake pedal
Make sure that the brake pedal has 0.1 to 3
mm (0.0039 to 0.12 in.) free play when pressed
by finger.
Check also that when the brake pedal is fully
depressed, there is a gap of 20 mm (0.79 in.) or
more between the pedal and the floor.
P. 1 2 - 49
Clutch pedal free play
<Manual transmission vehicles>
With your hand, depress the clutch pedal and
make sure that it has 0.2 to 4 mm (0.0079 to
0.16 in.) of free play.
P. 1 2 - 52
Z12715
Z09197
Z10681
Z11955
Z11945
FEFG.book Page 10 Thursday, March 10, 2005 7:30 PM
To Next Page
Loading...
Need help?
General
