Mitsubishi FX3G Series Programming Manual

487
FX3G/FX3U/FX3GC/FX3UC Series
Programming Manual - Basic & Applied Instruction Edition
18 Floating Point – FNC110 to FNC139
18.4 FNC116 – ESTR / Floating Point to Character String Conversion
11
FNC30-FNC39 Rotation and Shift
12
FNC40-FNC49 Data Operation
13
FNC50-FNC59 High-Speed Processing
14
FMC60-FNC69 Handy Instruction
15
FNC70-FNC79 External FX I/O Device
16
FNC80-FNC89 External FX Device
17
FNC100-FNC109 Data Transfer 2
18
FNC110-FNC139 Floating Point
19
FNC140-FNC149 Data Operation 2
20
FNC150-FNC159 Positioning Control
• The number of digits of the decimal part which can be specified by +2 is from 0 to 7.
However, the following must be satisfied, "Number of digits of decimal part ≤ (Total number of digits - 7)"
For example, when the total number of digits is "12", the number of digits of the decimal part is "4", and
"-12.34567" is specified, data is stored in and later as shown below:
• The character string data after conversion is stored in the devices and later as shown below:
- For the sign of the integer part, "20H (space)" is stored when the binary floating point data is positive, and "2DH
(-)" is stored when the data is negative.
- The integer part is fixed to 1 digit.
"20H (space)" is stored between the integer part and the sign.
- If the decimal part of the binary floating point data cannot be accommodated in the number of digits of the
decimal part, low-order digits of the decimal part are rounded.
- When the number of digits of the decimal part is set to any value other than "0", "2EH (.)" is automatically stored
in "specified number of digits of decimal part + 1"th digit.
When the number of digits of the decimal part is "0", "2EH (.)" is not stored.
- For the sign of the exponent part, "2BH (+)" is stored when the exponent is positive, and "2DH (-)" is stored when
the exponent is negative.
S 2
D
1
12
4
2 3 4 6 E + 0 1
Sign (integer part)
+1
+2
1
Sign (exponent part)
20H space
2EH(.)
0000H
b15
+1
+2
+3
+4
b8 b7 b0
0000H is automatically stored at the end of the
character string.
33H(3)
36H(6)
2DH(-)
31H(1)
32H(2)
34H(4)
2BH(+)
31H(1)
45H(E)
30H(0)
+5
+6
+1
Binary floating point
(real number)
− 12.34567
Total number
of digits
Number of
digits of
decimal
part
Fixed to 2 digits
S 1 
S 2 
D 
S 2 
S 2 
S 1 
D 
D 
D 
D 
D 
D 
D
1
12
4
+1
+2
Total number of digits (12)
0
"20H (space)" is stored.
2 3 4 6 E + 11
Fixed to 1 digit
+1
− 12.34567
S 2 
S 1  S 1 
S 2 
S 2 
1
12
4
+1
+2
Total number of digits (12)
02 3 4 6 E + 11 67
Number of digits of
decimal part (4)
Cut by rounding.
+1
− 12.34567
S 1  S 1 
S 2 
S 2 
S 2 
1
12
4
+1
+2
Total number of digits (12)
02 3 4 6 E + 11
Number of digits of
decimal part (4)
Automatically added.
+1
− 12.34567
S 1  S 1 
S 2 
S 2 
S 2 

Mitsubishi FX3G Series Specifications

General

Model	FX3G Series
Power Supply	AC 100-240V or DC 24V
Program Capacity	32, 000 steps
Execution Speed	0.21 µs/basic instruction
Communication Options	RS-422, USB, Ethernet
Expansion Modules	Analog, digital, communication
Programming Language	Ladder Logic, Instruction List
Built-in Functions	High-speed counters, pulse output
Analog I/O	Available via expansion modules