Mitsubishi FX3G Series Programming Manual

925
FX3G/FX3U/FX3GC/FX3UC Series
Programming Manual - Basic & Applied Instruction Edition
B Instruction Execution Time
B-6 Execution Time on Combination of Applicable Devices and Indexing
31
FNC276-FNC279 Data Transfer 3
32
FNC280-FNC289 High-Speed Processing 2
33
FNC290-FNC299 Extension File Register
34
FNC300-FNC305 FX
3U
-CF-ADP
35
SFC•STL Programming
36
Interrupt Function
37
Special Device
38
Error Code
A
Version Up Information
B
Execution Times
•FX3G/FX3GC PLCs
- MOV instruction (16-bit operation)
*1. When K4 is specified, and the head bit device number is a multiple of 8 (K4M0, K4M8 ...)
- DMOV instruction (32-bit instruction)
*1. When K8 is specified, and the head bit device number is a multiple of 8 (K8M0, K8M8 ...)
2. Data comparison instruction execution time
•FX3U/FX3UC PLCs
- Data comparison instruction (16-bit operation)
*1. These combinations are handled as exceptions because high-speed processing is adopted in the technique.
*2. When the instruction is executed for a BFM in a special extension block/unit for FX3U/FX3UC Series.
- Data comparison instruction (32-bit operation)
*1. These combinations are handled as exceptions because high-speed processing is adopted in the technique.
*2. When the instruction is executed for a BFM in a special extension block/unit for FX3U/FX3UC Series.
Command
contact
S (source)
D (destination)
Standard mode Extension mode
Without indexing (µs) With indexing (µs) Without indexing (µs) With indexing (µs)
KnY,
KnM,
KnS
*1
T,C,D,R
KnY,
KnM,
KnS
*1
T,C,D,R
KnY,
KnM,
KnS
*1
T,C,D,R
KnY,
KnM,
KnS
*1
T,C,D,R
ON
KnX,KnY,KnM,KnS 0.64 0.72 14.68 8.28 1.56 1.8 16.42 9.92
T,C,D,R 0.88 0.84 13.08 6.68 1.84 1.96 14.82 8.32
K,H 0.48 0.52 12.28 5.78 1.24 1.4 13.22 7.22
OFF
KnX,KnY,KnM,KnS
0.36 0.58 0.52 0.82T,C,D,R
K,H
Command
contact
S (source)
D (destination)
Standard mode Extension mode
Without indexing (µs) With indexing (µs) Without indexing (µs) With indexing (µs)
KnY,
KnM,
KnS
*1
T,C,D,R
KnY,
KnM,
KnS
*1
T,C,D,R
KnY,
KnM,
KnS
*1
T,C,D,R
KnY,
KnM,
KnS
*1
T,C,D,R
ON
KnX,KnY,KnM,KnS 0.68 0.88 19.48 8.68 1.6 2.12 21.32 10.32
T,C,D,R 1.24 1.04 18.18 7.28 2.2 2.4 19.92 9.02
K,H 0.56 0.56 17.18 6.28 1.48 1.88 19.12 8.22
OFF
KnX,KnY,KnM,KnS
0.4 0.58 0.62 0.82T,C,D,R
K,H
S (source)
D (destination)
Without indexing (µs) With indexing (µs)
KnY,KnM,K
nS
T,C,D R
U\G
*2
KnY,KnM,K
nS
T,C,D R
U\G
*2
KnX,KnY,KnM,KnS 16.2 13.0 14.7 133.1 19.4 17.4 17.6 134.7
T,C,D 13.0
1.22
*1
11.3 129.9 17.4 15.4 15.7 132.8
R 14.7 11.3 12.9 131.4 17.6 15.7 16.0 133.1
U\G
*2
133.0 129.3 131.4 298.2 134.3 131.0 138.9 299.4
K,H 13.4
1.22
*1
11.7 130.2 16.3 14.2 14.5 131.6
S (source)
D (destination)
Without indexing (µs) With indexing (µs)
KnY,KnM,K
nS
T,C,D R
U\G
*2
KnY,KnM,K
nS
T,C,D R
U\G
*2
KnX,KnY,KnM,KnS 16.4 13.2 14.7 201.1 19.6 17.9 18.0 202.7
T,C,D 13.2
1.48
*1
11.6 197.1 17.9 16.1 16.2 200.3
R 14.7 11.6 13.0 198.6 18.0 16.2 16.3 200.4
U\G
*2
201.0 197.1 198.6 432.4 202.4 198.5 200.0 433.8
K,H 13.9
1.48
*1
12.3 197.8 17.1 15.3 15.4 199.4

Mitsubishi FX3G Series Specifications

General

Model	FX3G Series
Power Supply	AC 100-240V or DC 24V
Program Capacity	32, 000 steps
Execution Speed	0.21 µs/basic instruction
Communication Options	RS-422, USB, Ethernet
Expansion Modules	Analog, digital, communication
Programming Language	Ladder Logic, Instruction List
Built-in Functions	High-speed counters, pulse output
Analog I/O	Available via expansion modules