Mitsubishi FX3U-4AD User Manual

G-3
1 Outline
1.1 Outline of Functions
FX 3G /FX 3U /FX 3UC PLC User's Manual - Analog Control Edition
FX3G-1DA-BD (1-channel analog Output)
A
Common Items
B
FX
3U
-4AD
FX
3UC
-4AD
C
FX
3U
-4AD-ADP
D
FX
3G
-2AD-BD
E
FX
3U
-4DA
F
FX
3U
-4DA-ADP
G
FX
3G
-1DA-BD
H
FX
3U
-4AD-PT
-ADP
I
FX
3U
-4AD-PTW
-ADP
J
FX
3U
-4AD-PNK
-ADP
1. Outline
This chapter outlines the FX3G-1DA-BD (referred to as 1DA-BD).
1.1 Outline of Functions
The FX3G-1DA-BD is an analog expansion board. Which is connectable with the FX3G Series PLC to output
the voltage/current data for up to 1 channel.
1) Up to 2
*1
units of 1DA-BD can be connected to the FX3G Series PLC.
(Including other analog expansion boards, analog special adapters).
2) Either "voltage output" or "current output" can be specified.
3) The D/A conversion results will be automatically output as the values to the special data register of the
FX
3G Series PLC.
Number of connectable
units
……
For a detailed
description of wiring,
refer to Chapter 3.
……
To check the connectable
PLC model number, refer
to Section 1.3.
Point and section to be
referred to
System
……
Special devices
……
For a detailed description
of special devices, refer to
Chapter 4.
For a detailed description
of a basic program, refer to
Section 4.8.
Analog data
Refer to the system configuration shown in the User's Manual - Hardware Edition to check the number of connectable units
and to configure the entire system.
1st board
M/D8260 to M/D8269
M/D8270 to M/D8279
2nd board
For FX 3G Series PLC
FX
3G Series PLC
Inverter, etc.
Contents
Output mode
switching
Output setting data
Error status
Transfer direction
*1. Only 1 analog board can be connected to the 14-point and 24-point type main unit.
2
*1
maximum
Connected to the option connector 2
Connected to the option connector 1
2nd 1st
including other analog expansion
boards, analog special adapters.
( (

Mitsubishi FX3U-4AD Specifications

General

Brand	Mitsubishi
Model	FX3U-4AD
Category	Controller
Language	English