Mitsubishi MELSEC Q Series Programming Manual

7-417
SP.FWRITE
1
2
3
4
6
6
7
8
7.18 Other instructions 7.18.12 Writing Data to Designated File (SP.FWRITE)
Caution
(1) For only QCPU, only the ATA card drive (2) can be set as (drive designation).
Note that when the Flash card is loaded, the SP.FWRITE instruction cannot be used to
perform writing.
The SRAM card, standard RAM or standard ROM drive cannot be set.
For only LCPU, only the SD memory card drive (2) can be set as (drive designation).
(2) For CSV setting, the data written are decimal values.
Character "A" (41
H
) "65" is written.
Handling range: -32768 to 32767
(3) For binary write, the word-specified file position setting range is 00000000
H to 7FFFFFFFH
and FFFFFFFF
H.
S0
S0
Example

Mitsubishi MELSEC Q Series Specifications

General

Brand	Mitsubishi
Model	MELSEC Q Series
Category	Controller
Language	English