Mitsubishi MELSEC Q Series Programming Manual

7-425
SP.FWRITE
1
2
3
4
6
6
7
8
7.18 Other instructions 7.18.12 Writing Data to Designated File (SP.FWRITE)
Program Example
(1) When X10 is turned ON, the following program adds four bytes of binary data (00H, 01H,
02
H, and 03H) to file "ABCD.BIN" in the memory card inserted to drive 2.
• Assume that 8 points from are reserved for the control data devices.
[Ladder Mode]
[List Mode]
D0
Sets the number of request write data
Normal completion display
Sets the execution/completion type
Sets the designation of the number of columns
Sets the file name
Error completion display
Sets the data to be written.
Instruction
Device
Step

Mitsubishi MELSEC Q Series Specifications

General

Brand	Mitsubishi
Model	MELSEC Q Series
Category	Controller
Language	English