7-424
SP.FWRITE
Operation Error
(1) In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and
an error code is stored into SD0.
• Drive specified by drive designation device contains the medium other than the ATA
card. (QCPU) (Error code: 4100)
• Drive specified by drive designation device contains the medium other than the SD
Memory card. (LCPU) (Error code: 4100)
• Values specified in control data and the subsequent devices are out of the setting
range. (Error code: 4100)
• Value designated by "No. of request write data" ( ) is out of the setting range, or
exceeds the device range designated by ( +1) or the subsequent devices.
(Error code: 4101)
• Empty space in the ATA card is insufficient. (QCPU) (Error code: 4100)
• Empty space in the SD Memory card is insufficient. (LCPU) (Error code: 4100)
• No free space is found when an attempt is made to create a new file.
(Error code: 4100)
• Invalid device is designated. (Error code: 4004)
• Access error occurred in the ATA card. (QCPU) (Error code: 4100)
• Access error occurred in the SD Memory card. (LCPU) (Error code: 4100)
• An unusable value is set for a file name ( ). (Error code: 4100)
• The attribute of a file name ( ) is "read only". (Error code: 4100)
• The device specified by or exceeds the range of the corresponding device.
(For the Universal model QCPU, LCPU.) (Error code: 4101)
S0
S0
D0
S2
S2
S1
S1
D0
D1
To Next Page
Loading...
Need help?
General
