Screen Cause Solution (Reference)
l
The brake auto hold is not available.
l
Refer to “Brake auto hold” on page 7-35.
l
The brake auto hold system does not turn
on because the driver’s seat belt is not fas-
tened.
l
Press the brake auto hold switch after fas-
tening the driver’s seat belt.
Refer to “Brake auto hold” on page 7-35.
l
The brake auto hold system does not turn
off because the brake pedal is not pressed.
l
Depress the brake pedal more firmly than
usual with the right foot. Then, press the
brake auto hold switch.
Refer to “Brake auto hold” on page 7-35.
l
There is a fault in the engine oil circula-
tion system.
l
Immediately stop the vehicle in a safe
place. We recommend you to have it
checked.
Refer to “Oil pressure warning display”
on page 6-58.
l
There is a fault in the Supplemental re-
straint system (SRS) airbag or the preten-
sioner system.
l
We recommend you to have it checked,
immediately.
Refer to “SRS warning lamp/display” on
page 5-35.
Indication lamp, warning lamp, and information screen display list
6-39
OGGE19E1
Instruments and controls
6
To Next Page
Loading...
