Screen Cause Solution (Reference)
l
There is a fault in the Active Stability
Control (ASC).
l
We recommend you to have it checked.
Refer to “Active stability control (ASC)”
on page 7-43.
l
There is a fault in the hill start assist.
l
We recommend you to have it checked.
Refer to “Hill start assist” on page 7-37.
l
The outside temperature is 3 °C (37 °F) or
less.
l
Be careful of ice on the road.
l
The road can be icy even when this warn-
ing is not displayed, so drive carefully.
l
The Adaptive Cruise Control System
(ACC) has detected the approach of the
vehicles in front.
l
Increase the following distance by de-
pressing the brake pedal or marking other
decelerating control.
Refer to “Adaptive Cruise Control System
(ACC): Proximity alarm” on page 7-58.
l
The Forward Collision Mitigation System
(FCM) has detected the danger of colli-
sion.
l
Take appropriate action such as depress-
ing the brake to avoid collision.
Refer to “Forward collision warning func-
tion” on page 7-68.
l
The Adaptive Cruise Control System
(ACC) detected a stop of the vehicle in
front and stopped your vehicle, but the
brake will be released soon.
l
Depress the brake pedal as soon as your
vehicle comes to a stop.
Refer to “Adaptive Cruise Control System
(ACC)” on page 7-55.
l
The Electric parking brake cannot be ap-
plied automatically.
l
Depress the brake pedal as soon as possi-
ble.
Refer to “Brake auto hold” on page 7-35.
Indication lamp, warning lamp, and information screen display list
6-40
OGGE19E1
Instruments and controls
6
To Next Page
Loading...
