Screen Cause Solution (Reference)
l
The Blind Spot Warning (BSW) sensor is
temporarily not available for some reason
such as the environmental condition or in-
crease of the sensor temperature.
l
When the warning display does not disap-
pear after waiting for a while, contact a
MITSUBISHI MOTORS Authorized
Service Point.
Refer to “Blind Spot Warning (BSW)” on
page 7-82.
l
The Blind Spot Warning (BSW) does not
operate normally because there are some
malfunctions in the sensor or the system.
l
We recommend you to have it checked,
immediately.
Refer to “Blind Spot Warning (BSW)” on
page 7-82.
l
Foreign objects, such as dirt, snow or ice,
adhere to the bumper surface around the
sensor.
l
Remove a foreign object on the bumper
surface around the sensor.
When the warning display does not disap-
pear after having cleaned the bumper sur-
face around the sensor, contact a
MITSUBISHI MOTORS Authorized
Service Point.
Refer to “Blind Spot Warning (BSW):
When there is a foreign objects on the
sensor” on page 7-86.
l
The Rear Cross Traffic Alert (RCTA) has
detected a vehicle that is approaching
your vehicle.
l
Pay special attention to the rear of your
vehicle.
Refer to “Rear Cross Traffic Alert
(RCTA)” on page 7-86.
Indication lamp, warning lamp, and information screen display list
6-45
OGGE19E1
Instruments and controls
6
To Next Page
Loading...
