When “MIDDLE” is selected
When “NEAR” is selected
CAUTION
l
For the FCM brake prefill, the FCM brake
assist and the FCM braking functions, the
function triggering timing cannot be
changed.
When a problem is detected
E00652100023
When the FCM system determines that its
performance has been degraded, the FCM
will become inoperative.
This can occur when:
l
Foreign objects, such as dirt, snow or
ice, adhere to the windscreen of the sen-
sor portion.
l
There are adverse weather conditions,
such as rain, snow, sand storms, etc.
l
A vehicle in front or an oncoming vehi-
cle is splashing water, snow or dirt.
The “DRIVER ASSISTANCE CAMERA
BLOCKED” message will appear and the
indicator will appear on the information
screen of the multi-information display.
When the sensor performance returns, the
FCM functions will resume operation.
If the display keeps showing the message,
there is a possibility that the sensor has a
malfunction. Contact a MITSUBISHI
MOTORS Authorized Service Point for in-
spection of the sensor.
NOTE
l
The “DRIVER ASSISTANCE CAMERA
BLOCKED” message may temporarily ap-
pear on the information screen when the sen-
sor cannot detect a vehicle, a pedestrian or
an object within range. This is not a mal-
function. When a vehicle or an object comes
within range, the FCM function will resume
and the message will go off.
l
The “DRIVER ASSISTANCE CAMERA
BLOCKED” message may appear on the in-
formation screen when driving on a non-
busy road with a few vehicles and obstacles
in front.
If the system becomes temporarily unavaila-
ble for some reason, the following message
may appear.
The indicator will appear on the informa-
tion screen of the multi-information display
and the FCM will automatically be turned
off. If the display keeps showing the mes-
sage, there is a possibility that the FCM has a
malfunction. Contact a MITSUBISHI
MOTORS Authorized Service Point for in-
spection of the system.
Forward Collision Mitigation System (FCM)*
7-73
OGGE19E1
Starting and driving
7
To Next Page
Loading...
