Switzerland 250 V/10 A
Italy 250 V/10 A
Denmark 250 V/13 A UK, Ireland 250 V/13 A
Germany, Spain, France, Sweden, etc.
250 V/16 A
IEC 60309-2/CEE17 (220-250 V/16 A)
AA2002211B
6. Remove the cap (E) on the normal
charge connector (F) and make sure that
there is no foreign matter such as dust at
the end of the normal charge connector
and the normal charge port.
7. Connect the normal charge connector
until a click sound is heard without
pressing the release button (G).
CAUTION
l
Do not clasp the top of normal charge con-
nector. It could cause injury to touch the pro-
trusion on the charging lid.
NOTE
l
If the operation mode of the power switch is
ON with the EV charging cable remains con-
nected to the normal charge port, the plug-in
hybrid EV system does not turn ON.
l
Do not connect or disconnect the normal
charge connector repeatedly in a short peri-
od. Charging may not be started.
l
If you want to turn the operation mode to
“OFF” from the “ACC” or “ON” position in
order to use an electrical device such as au-
dio during charging, make sure that the se-
lect position is in “P”, and press the power
switch to turn “OFF” without depressing the
brake pedal.
8. Make sure that the charging indicator
(H) on the instrument cluster is illumina-
ted.
Normal charging (charging method with rated AC 220-240V outlet)
3-14
OGGE19E1
Charging
3
To Next Page
Loading...
