Mitsubishi QJ71E71-100 User Manual

2 - 12 2 - 12
MELSEC-Q
2 USING THE E-MAIL FUNCTION
(2) E-mail setting
[Purpose of setting]
Perform the setting to use the e-mail function.
[Start procedure]
[Network parameter setting the number of MNET/10H Ethernet cards] →
E-mail setting
[Setting screen]
[Setting item]
Item name Description of setting item Setting range/option
Password Set the password to the mail server —
Mail address Set the mail address for the Ethernet module —
Check of mail
Select whether or not to make inquiries to the incoming mail
server regarding the receiving status
• Check mark
(Inquire)
• No check mark
(Do not inquire)
General
setting
At every
Set the time interval and unit for making inquiries to the
incoming mail server
• 30 s to 24 h
• h/min/s
SMTP server name Set the send mail server name —
Input format Select the input format of the send mail server's IP address
• Decimal
• Hexadecimal
Mail send
setting
IP address Set the IP address of send mail server 00000001
H
to FFFFFFFE
H
POP server name Set the receive mail server name —
Input format
Select the input format of the receive mail server's IP
address
• Decimal
• Hexadecimal
Mail server
name
Mail receive
setting
IP address Set the IP address of the receive mail server 00000001
H
to FFFFFFFE
H

Mitsubishi QJ71E71-100 Specifications

General

Brand	Mitsubishi
Model	QJ71E71-100
Category	Controller
Language	English