Mitsubishi QJ71E71-100 - Sending E-Mails Using the PLC CPU Monitoring Function; News Setting

2 - 32 2 - 32
MELSEC-Q
2 USING THE E-MAIL FUNCTION
2.9 Sending E-mails Using the PLC CPU Monitoring Function
When the monitoring information read from the QCPU matches with the news
conditions set by the user, the Ethernet module sends an e-mail to the external device.
2.9.1 News setting
[Purpose of setting]
The monitoring conditions (notification conditions) of the PLC CPU can be set on the
News setting screen of GX Developer.
The monitoring function of the PLC CPU can be used according to this setting.
Both CPU status monitoring and device monitoring can be designated as notification
conditions.
[Start procedure]
[E-mail setting] → News setting
[Setting screen]