Mobotix Q24M - Page 142

142/164
Q24M Camera Manual: Operating The Camera
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
• Disable public access: Guest users are only allowed to access the Guest screen of
the camera without entering a password. If this is not desired, you should deacti
-
vate public access (Quick Installation or Admin Menu> Users and Passwords).
=> ( Software Camera Manual Part 2 , Section 5.4.1 )
• Add users and assign access rights: Similar to a computer operating system, you
can add users and user groups and assign the desired rights (Admin Menu> Users
and Passwords, Admin Menu> Group Access Control Lists (ACL)). This approach
allows individual access rights to be assigned or denied to camera-specific features
based on the user groups.
=> ( Software Camera Manual Part 2 , Section 5.4.1 )
• Deactivate the automatic reboot: In its factory state, every MOBOTIX camera will
automatically reboot every morning at 3:36a.m. All images in the camera’s storage
buer will be deleted during this reboot. Images stored on external file servers, internal
flash storage, or SD cards will NOT be aected by this reboot. Make sure that you
deactivate the automatic reboot if this is not desired (Admin Menu> Time Tasks).
=> ( Software Camera Manual Part 2 , Section 7.9.2 )
•
Optimize the image settings: The factory image settings of MOBOTIX cameras deliver
excellent images for most application scenarios and should not be changed. If you do wish
to make changes, your changes should be minor and gradual. You should, however, set
an image program according to the application scenario of the camera. Image programs
provide a quick and simple method for adjusting the camera to the application scenario
as they perform several configuration steps at once (Image Programs Quick Control).
=> ( Software Camera Manual Part 2 , Section 5.5.2 )
• Set the resolution of the live image: By factory default, all MOBOTIX cameras are
delivered with an image resolution of 640x480 pixels. You can select the desired
resolution using the Resolution Quick Control.
=> ( Software Camera Manual Part 2 , Section 4.3.3 )
• Adjust the exposure: The automatic exposure control of the MOBOTIX camera uses
individually configurable windows to determine the best image exposure. Open the
Exposure Control Quick Control and select a predefined set of exposure windows. If
required, you can also define custom exposure windows (Setup Menu> Exposure
Settings).
=> ( Software Camera Manual Part 2 , Section 5.7 )