Mobotix Q24M - Installing the Vandalism Set; Mounting Instructions

82/164
Q24M Camera Manual: Installation
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
2.7 Installing The Vandalism Set
2.7.1 Mounting Instructions
The Vandalism Set serves to provide additional security and protection for Q24M cameras.
It may be installed with little eort and at low cost. This set is recommended for use under
particularly demanding conditions (such as prisons, trouble areas, train stations, etc.). The
set consists of a robust stainless steel cover for the camera housing (matt or polished)
and an impact-resistant dome cover made of reinforced plastic.
To install the Vandalism Set, simply mount the stainless steel cover and the included security
screws (with the four mounted spacers) over the standard housing.